With the Insta360 lens protector, your camera lens is always protected from scratches. It sticks directly onto the lens to protect it from dust and scratches.
Properties:
Protection for both lenses.
Protects lenses from dust and scratches.
Specifications:
Technical specifications:
Material: 1.5 mm: polymethyl methacrylate (PMMA)
Weight: 1.5g (0.05oz) / 1 pc
Dimensions (W x H): 34.80 x 10.95 mm (1.37 x 0.43 in)
Notes:
Before use, make sure the camera lens is clean and dry. Always install the lens protector in a clean and dry environment. Check carefully for dust or other particles, as these may affect the recording results.
Before installation, make sure to install the thin protector on the side of the camera with the screen and use the thick protector on the opposite side.
If you remove the lens protector from the X3, apply new double-sided adhesive before reinstalling the lens protector.
The sticky lens guard is only splash-proof and is not intended for underwater shooting. If you intend to use the X3 underwater, for best results, remove the Sticky Lens Guard and use the X3 diving case.
Use the supplied triangular pry tool to remove the lens cap. Be careful not to scratch the camera lens when removing the lens cap.
To replace the double-sided adhesives, first remove the used double-sided adhesives and make sure the inside of the lens protector is clean and free of residue. Repeat the installation process, making sure the notch on the edge of the lens protector is aligned correctly.
Content:
2x sticky lens protectors
6x double-sided adhesive strips
1x Triangular tool
1x lens cleaning cloth
Comment:
Do not use the adhesive lens protector in or near water.
The double-sided adhesive strips are already attached to the lens protector.
